7th ERCOFTAC/IAHR Workshop
on Refined Turbulence Modelling

May 28/29th 1998

UMIST, Manchester, UK

The 7th Turbulence Modelling SIG Workshop was held in Manchester on Thursday/Friday May 28th and 29th 1998 at UMIST.

Details of the test cases which were considered, and crossplots of the contributed computational results, can be obtained from the links below.

Workshop Test Cases

• Case 7.1: Fully developed flow in a plane channel in orthogonal mode rotation with rotation numbers up to 0.5
  Crossplots for case 7.1
• Case 7.2: Two-dimensional flow and heat transfer over a smooth wall "roughened" with square sectioned ribs"
  Crossplots for case 7.2
• Case 7.3: Fully developed flow and heat transfer in an orthogonally rotating square sectioned rib-roughened duct (A 3-D case, although the flow is periodic and the geometry relatively simple).
  Crossplots for case 7.3
• Case 6.2: Fully developed flow and heat transfer in a matrix of surface mounted cubes (Another 3-D case, although the flow is periodic and flow boundaries conform with a Cartesian grid).
  Crossplots for case 6.2
• Case 5.3: Natural convection in an infinite cavity formed by a heated and cooled wall.

Crossplots for case 5.3