This file describes data presented in this diskette which were
obtained with the hot wire technique on both sides of the wing.
     The files are named beginning either with " LHS " or " RHS "
or " UP " to denote the location of the data taken." LHS " denote the left
-hand side of the wing looking upstream, " RHS " denote
the right-hand side of the wing, and " UP " denote the 0.75 chord
upstream of the wing measurements. The subsequent numbers show the
station numbers where the data are taken. The left-hand side files are
numbered in increasing order proceeding upstream, and the right-hand side
files are numbered in increasing order proceeding downstream. The 0.75
chord upstream profile numbers increase in the +z direction. The
right-hand side hot wire measurements were made at the same station
locations of the Laser Doppler Velocimeter measurements. The same
extension numbers for the right-hand side hot-wire technique data files
and for the LDV data files show the same station locations. The extensions
" TC ", " FS ", " NS ", are used to designate the coordinate system the
data are presented in.
     In the files first 6 lines give the location of the measurements
and the flow conditions. Next 2 lines show the title of the measured
quantities. In the rest of the files, data are given. The data consist
of the y location of the measurement in inches, U and W components of
the mean velocity vector nondimensionalized with the daily reference
velocity, the Flow Angle in degrees, and the u^2, w^2 normal and uw shear
stresses nondimensionalized with the square of the reference velocity.